SOHC.co.uk Forums > CB750
Cb750k6 clutch disc query
Nurse Julie:
Paul, I have just read through all the above, are you certain that the new friction plates you are wanting to fit, are actually for a CB750/4. What I'm saying is, have you ordered / received the correct parts?
Edit...Did you buy this as a kit from David Silver by any chance?
Paulreade:
Hi Julie, I purchased the bike from James H and he sent me the parts for the clutch confirming they are the discs for the bike and from David silver spares.
So hopefully all ok.Do you ask for any specific reason ?
Regards
Paul
Nurse Julie:
Ah, it's all making more sense to me now. Yes, James did supply you with the correct clutch kit as sold by Silver for a K6. The problem is, maybe it's the wrong clutch for your bike. The kit you really need is from EBC part number CK1145. This kit only has one directional plate. Hope this helps. As you get more used to your bike and the parts, you will realise although David Silver supplies a lot of parts, not all of them are correct, spark plugs come to mind but, that's another story.
Paulreade:
Yes it's been an interesting debate on both sides of the pond ( usa&uk). The guys in the USA have said exactly the same thing that I should be using the CK 1145 pack not a set with all slanted oil grooves. They are also advocating a double sprung steel disc , I guess to quieten the rattle ?.
Will be taking up with David silver spares in the new year.
Regards
Paul
AshimotoK0:
The bulletin they are referring to is from 'Wrench' and its on here buried right near the end of my dropbox mega CB750 file. It refers to using a double clutch plate from the Goldwing and was used in the Cb750K7 clutch
You need to scroll down a looooong way on this but t's there !
https://www.dropbox.com/s/anpzqn2r55f1o9k/CB750%20Mega%20Parts%20Service%20and%20More.pdf?dl=0
[ Guests cannot view attachments ] [ Guests cannot view attachments ]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version