SOHC.co.uk Forums > CB350/400
Old wires !!!
vraksianrebel:
How hard is it to get replacement plugs and things?
Bryanj:
Not easy
Nurse Julie:
--- Quote from: Athame57 on January 26, 2019, 11:18:11 PM ---I had a new loom fitted to my bike but I got confused from the start, so I let a mechanic do the job instead, I wonder then did that job extend into the headlamp....I hate undoing the things!
--- End quote ---
Most of CB400/4 wiring loom connectors are in the head lamp bowl. It is like a birds nest in there when everything is connected and is an absolute pain to find or get to the wire you need. The block connecter the red wire came from is behind the head lamp and is still very awkward to get to as difficult to get hand/ fingers in there to disconnect.
Here is what goes in to the head lamp bucket [ Guests cannot view attachments ]
And the other ends
[ Guests cannot view attachments ]
mattsz:
Is that from the ignition switch block, Julie?
[ Guests cannot view attachments ]
Interesting that of its five wires, the red is the only one with issues. Do you think the connector crimps worked their way through the insulation, and time just took care of the rest?
Nurse Julie:
Yes Matt, ignition block connector. The other 4 wires in the block were fine so I'm not sure why this happened to the red wire. But, that's old bikes and original wiring for you I suppose.
[ Guests cannot view attachments ]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version