SOHC.co.uk Forums > CB750

Exhaust Studs

<< < (2/3) > >>

Johnnyboy750:
Looking at the bike this morning in the garage I can see that it has 5 stainless slotted head tapered screws, 1 stainless Allen key tapered screw and two studs so a general mix and match of non standard items. Until I pull the exhausts off the bike and further investigate the condition of the threads I won't know how many need sorting but as a starter where can I source the correct posi head screws?

Many thanks for all the replies.

John

neat street:
CMSNL
product number: 9360008022
hope this helps? 1 euro each plus carriage
maybe also available from DS

Johnnyboy750:
That’s great thanks for your help.

John

Johnnyboy750:
On further investigation of my K6 I have found around 3 threads past their best. One in particular has been loose for so log it has opened the hole out to the extent that a M8 helicoil I got from work just drops straight in.

This level of work is above my skills so looking for a good highly recommended company to have a look at all 8 threads while the head is off and sort it out so the fix is permanent.

Much appreciated for any guidance of company’s who would be capable of this task?

Kind regards,
John

Nurse Julie:
Have you got the engine out yet John?

Navigation

[0] Message Index

[#] Next page

[*] Previous page