SOHC.co.uk Forums > Project Board
1967 CB450K0 Black Bomber Rebuild - By Royhall
royhall:
I thought about machining the boss to bomber dimensions but that still leaves the bearing moved over. It would fit as long as the 500T spacers were used. Wouldn't have thought there would be any stress problems etc from the new bearing position as it worked well on the 5 speed. You would have to make a spacer the exact same thickness as the metal removed as the circlip slot that holds the sprocket on would then be out of position. All round easier to source a better hub and maybe have Trigger weld it.
AshimotoK0:
Don't forget that the offer is still there for a free one with minimal cracking Roy. I agree that your original one should be scrapped.
royhall:
Thanks Ash will see what Saturday brings first.
royhall:
And verily on this Christmas morn did a wise man come from the East (Hull) bearing gifts for the new born Bomber. And royhall saw that it was good. All hail to the prophet Ashimoto and the heavily laden camel that is named UPS.
Charles royhall Dickens, Christmas 2019
MCTID:
Bah Humbug !
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version