SOHC.co.uk Forums > Project Board
1967 CB450K0 Black Bomber Rebuild - By Royhall
royhall:
Forgot to say Ash, I'm only needing replated parts for the 14C carbs. They are way different to the later versions in that spindles and springs are smaller. I'm attempting to bring back to life a pair of 14C's that have been shot blasted so the zinc is damaged.
[ Guests cannot view attachments ]
AshimotoK0:
OK then Roy .. mine all 14C but if you want yours plating I can probably do that.
mo goldie:
Hi Ash
I found out why the meter did Not let the juice though it...... as inside the fluke there is a big 15 amp fuse never seen one that big and it has blown don`t know where you can get them.....
Oh Roy.... is the Carb on the right a 14c as that is the one that looks the same as mine ?
royhall:
Thanks Ash that would be fantastic. Don't really want to trust a plater to do those bits as they will probably end up plating the shafts or something similar.
Yes Mo the one on the right is a 14C.
Sent from my Pixel 7 Pro using Tapatalk
AshimotoK0:
--- Quote from: mo goldie on March 18, 2024, 11:45:10 PM ---Hi Ash
I found out why the meter did Not let the juice though it...... as inside the fluke there is a big 15 amp fuse never seen one that big and it has blown don`t know where you can get them.....
Oh Roy.... is the Carb on the right a 14c as that is the one that looks the same as mine ?
--- End quote ---
Is it like this Mo? If so cheapest I can find in UK not China.
https://www.ebay.co.uk/itm/395247827626
That fuse will blow if you connect as I described AND operate the electric starter.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version