SOHC.co.uk Forums > Project Board
1967 CB450K0 Black Bomber Rebuild - By Royhall
mo goldie:
Yes that looks like the one Thanks Ash. I will double check and if so order.
I never used the starter as the solenoid to it was Not even connected at the time, I remember I got that fluke meter when I left work and have Not used it on that 10A setting before so someone must have blown it ha....wow that was a few years ago as well lol.
Are ok Roy thought that looked the same as mine which is the 14C
AshimotoK0:
Here's hoping Mo ! ;)
mo goldie:
yes great Ash thank you they were on the door matt when I got home one more thing out the way......what do I owe you for them ?
just need to get the fluke sorted out and I should be ready for a try out..... the fuse I think should take a few days to get here but when it do I can try it all out.
Cheers
Mo
AshimotoK0:
--- Quote from: mo goldie on March 19, 2024, 11:56:08 PM ---yes great Ash thank you they were on the door matt when I got home one more thing out the way......what do I owe you for them ?
just need to get the fluke sorted out and I should be ready for a try out..... the fuse I think should take a few days to get here but when it do I can try it all out.
Cheers
Mo
--- End quote ---
No charge (on the needles) .... hoping charge on the battery ;D
mo goldie:
Hi Ash
Well thank you very much for them Needles Apricated they are now in the carbs and I have re-done the Ign timing and set the carbs with a colortune and she is running great Now well the only real way to know is a test ride But Not yet.
Anyway i can`t make head nor tail of what come out of the meter.... I did Cheat and use one strand out of a length of wire and put it across the burned out fuse just to get things going,,,, yes Not good but it worked ;D but I can understand the meter readings..... so have a look at the pictures and see if you can,
I will say with the yellow connected on its own not much happened about 12.66 Volts across the Battery, but Join the white and yellow so using the whole out put of the stator it was reading 13.1 volts when reving, so would it be ok to just keep the yellow and white connected or will that do something Bad ? as don`t want to blow up them Ign Modules but it did seem ok.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version