SOHC.co.uk Forums > Project Board
1967 CB450K0 Black Bomber Rebuild - By Royhall
mo goldie:
oh
that wire Ash is to the Battery, as I said it go`s in the wiring loom and comes out again to that right hand side of that plug that go`s back into the rectifier so that should not be doing that you say ?
and still a bit puzzled at the regulator yellow/green to go to the yellow you say, and I have to join the yellow and the white to get the full output of the stator so is it to go into the both of them before it comes into the rectifier or do it go in after ...and I would have thought at the red coming out of the rectifier as need to regulate what's coming out DC not the AC, do you think you could do me one of your great little sketch`s of how it go`s please.
mo goldie:
well just a bit of an update.
today I have been doing a bit of wiring from the stator upto the rectifier and also puting the regulator in a nice place so out the way. I have decided not use the wiring loom wires from the plug at the tool box end as I am using my own made wires from as I said the stator to the Reg/Rec also joined the yellow and white to get the full out put of the stator coils... they are all there just need the Master ( Ash ) to give me the heads up as to where to put them wires now I have them all ready to put on.
Cheers
Mo
AshimotoK0:
Sorry Mo ... not sure what you need from me ... it sounds like you have the wiring details pretty much sussed out if you are wiring directly and not going through the bikes main loom ? Or am I missing something?
mo goldie:
Hi Ash
Yes you are right in that I have made a wiring up only from the stator to the rec/Reg but Not wired them in yet ( that's where I Need your help please as to how )
yes I Know where the wires go into the Rectifier but I am Not sure where to put the green/yellow from the Regulator as you said that go`s to the yellow..... But the bit I don`t get is it on the wire before it go`s to the rectifier ? as I said I have joined the two stator wires together to give max out put to go to the Rectifier but where do I put that Green/yellow to ?
Just my way of thinking Not being up on electrics is that I thought you would put that on the red coming out of the rectifier so if the volts got to high then that would dump the excess to ground.......... as I say my thought was if I put it on the yellow it would be Getting the AC voltage going in to the Reg ?
all confusing Ash to me lol.......... more of a mechanical I am lol...............
cheers Mo
AshimotoK0:
That regulator is confusing I know. On the Honda system it's a 3 wire unit with a sense to the battery voltage but on the Kwak one it's just a connection between ground and the AC output.
I have illustrated the Kwak diagram . You need to connect the Yellow/Green wire to YELLOW on your Honda and thde black to ground (battery negative).
[ Guests cannot view attachments ]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version