SOHC.co.uk Forums > Project Board

My Rickman CR750 Restoration

<< < (5/6) > >>

SteveCR7:
Things have moved on a bit.

SteveCR7:
Hi all,

I am working on fitting a Lockheed caliper to standard Honda forks on a Rickman. I have swapped K7 forks for F2 forks (SOHC) as the 2 bolt fixing would be easier to make a mounting plate for.  I have a K7 disc which needs to be spaced out from the hub, but F2 discs have a much larger offset. Can anybody tell me the offset from the disc mounting face to the inner face of the disc at the pad face. The K7 disc is around 14mm, see attached photo. Also can anybody confirm the disc mounting holes have the same PCD on K7 and F2.

Thanks Steve

SteveCR7:
Not totally clear now I read it back, I need the offset for the F2 disc.

Cheers Steve

SteveCR7:
Anybody? Thanks Steve

SumpMagnet:
Once I pursuade the discs to come off my front wheel..I should be able to measure them. Might be a week or so before I get it done...but I can get it done.

Need to get them off to give the disc centres a clean up and paint

Navigation

[0] Message Index

[#] Next page

[*] Previous page