SOHC.co.uk Forums > CB350/400

Camchain adjuster

<< < (2/4) > >>

Sprocket:
I'd be interested to know the proper process too. But as I see it, the top bolt just holds the end of the adjuster in place, it's the one on the front of the engine that you would be slackening, allowing to take the slack then re-tightening?

Nurse Julie:
It is only the tensioner adjusting bolt (with lock nut) No.12, that you loosen and re tighten. You do t touch No.11 at all. For this procedure No.11 is of no consequence. If the horse shoe is jammed or the cam chain is knackered and at its maximum, some people remove bolt No.11 and push something down the hole to try and get more tension but, it achieves nothing if the horse shoes is seized (which is a very common problem on these engines) or the cam chain is beyond service limit. The only way to resolve these problems is to take engine out and renew everything.

This is from the shop manual.
[ Guests cannot view attachments ] [ Guests cannot view attachments ]

Clem2112:
The only real fault with the design of this engine is that mickey-mouse tensioner.
Why they didn't put it at the rear of the block like all other fours only Honda know.
Possibly, the designers thought it was a too tight a squeeze to access the thing beneath the carbs?

 I think the owners' handbook describes that to tension the chain, the engine should not be not running but rotated to TDC on one pair of cylinders, before loosening then re-tightening the adjuster bolt. Might work on a newish engine but I was shown how to do it with the motor idling and applying gentle firce down the top with a small screwdriver to help it as the springs apparently lost tension after a while.

Athame57:
Sounds like a bodge, for those without the means just now to do the whole job, can a new camchain be threaded through by splitting and joining links?

Nurse Julie:
Yes, you buy a 'soft link' chain as a replacement (one with a join) but you still have to cut the old one to link in the new one. (Edit....assuming you don't have a soft link fitted already. Standard chain solid, not split)  It also does nothing to sort out a seized horse shoe if you have that problem also. Horse shoe, =engine apart job.

Navigation

[0] Message Index

[#] Next page

[*] Previous page