SOHC.co.uk Forums > CB750

TANK LINER REMOVAL

<< < (9/9)

paul G:

--- Quote from: Nurse Julie on March 09, 2019, 03:14:23 PM ---
--- Quote from: paul G on March 09, 2019, 03:11:18 PM ---Still NOTHING HAPPENING >:( >:(

--- End quote ---
NO NEED TO SHOUT
Order a new tank and then something will be happening  ;D

--- End quote ---
YES THERE IS >:( >:( >:( :D

Andych:
Older Radiator shops have really good dipping tanks... I had a tank done here and it was in there for 10 days.. when it cam out he checked for pinholes and soldered up anything that looked suspect.

Erny:
Hi all,

refeshing this therad - my actual issue now on my CB550K1
Previous owner in US applied most probably Kreem liner or some other and result is bad - liner degraded, it is cracking, into full range of particles (bigger ones till small ones in form of kind of dust)
All in all, as consequnce, my petcock(s) is leaking and carbs too. There is quite some gasoline under bike overnigt.

I need to get reid of this f* liner to have clean tank...

So, question is, is there some definitive prooven method how to remove it from tank, while preserving tank outside (original) paint?
MEK?
POR-15 Stripper?
any other chemicals?


Attached pics of liner inside

Navigation

[0] Message Index

[*] Previous page