SOHC.co.uk Forums > CB500/550

rim and tyre question

(1/4) > >>

MIKE550/4:
hi

question about rims and tyres , this bike i am restoring not been used since 1983, dvla agrees to this, previous owner had started to restore it but decided against to concentrate on his bsa,  he changed rear tyre and rim and spokes .

done  a bit of research but wanted to clarify,

rear wheel

rear wheel rim in good condition has stamp D.I.D ( take it this is manufacturer, ) 185 by 18  tyre 306, is this march 06? ( safe to use still ? )

front wheel ( fun starts ) 185 by 19 ( bigger ?) 380 on tyre ( march 1980?)

fron wheel rim is in very poor condition and tyre/rim etc to be replaced, am i right with these codes though, seems very odd to have tyres that seem to differ by  23 years ?


also i am keen to have a go at lacing, possibly might have to take rear wheel apart to clean up hub, think with a spare afternoon i could do it, not keen on doing final trueing ( if thats correct word ) any local wheel finishers to me in northants area anyone could recommend

Bryanj:
Dont know of any code on tyre that gives date of manufacture,
DID was Honda OEM supplier
Rims and spoke kits from Dave Silver
Lacing and truing just takes time and patience---Give me a call andi'll talk you through it

MIKE550/4:
hi bryan,

well i thought it was this -

 306, rear wheel in my case, 3rd month of 2006,

front wheel, 380, march 1980,

 going to order a rim and spokes for front wheel , so will be in touch, engine is also getting done ,

mick:
Tyre code could be 30th week 2006 & 38th week 2000?, i'll ask my neighbour he's a tyre fitter  ;) cheers Mick.

mick:
are there any more letters or numbers besides 306 & 380 ?  cheers Mick.

Navigation

[0] Message Index

[#] Next page