SOHC.co.uk Forums > CB750

K6 Swingarm Pivot Rod

<< < (2/2)

AshimotoK0:
I had the same problem with my K0 so I carefully filed down the outside surface of the bronze bushes either side and kept reassembling until the swinging arm just pivoted under it's own weight. I think  my problem was that I didn't fully remove the paint from the swinging arm before pressing in the bushes though.The collar was a brand new one from Yamiya but I have an old NOS one too and it's exactly the same length. Like Trigger says you still need to fit the end dust caps.

Navigation

[0] Message Index

[*] Previous page