SOHC.co.uk Forums > CB350/400

Rocker cover bolt arrangement

(1/2) > >>

daz-j:
Hi all, hoping someone can point me in the direction of a good diagram showing the correct arrangement for the rocker cover bolts please, ie the correct length and grade of bolt for each location (23 of them if I'm counting right!).  It's not easy to decipher from the workshop manual diagram. 
Mine are a complete dog's dinner - a mixture of different lengths plus a few cross-head machine screws and some missing altogether.  This is partly because some of the M6 holes in the cylinder head are stripped - are helicoils ok for dealing with these?
Many thanks, Darren.

Nurse Julie:
Have a look at the micro fiche on CMSNL. They give all the details you need.
Here is the link to the fiche

https://www.cmsnl.com/honda-cb400f2-england_model14647/partslist/E01-1.html

Laverda Dave:
Link to the CMSNL website. This gives the bolt lengths so should help you. Otherwise go to parts manual in the Alladins cave section on this forum. https://www.cmsnl.com/honda-cb400f-england_model14639/partslist/E01-1.html#.XIgQSGmnw0M
Timserts are a much better alternative to helicoils but it depends if there is enough metal around the damaged thread. I've used helicoils before in this area and they pulled out the next time I removed the rocker cover!
Good luck.

Laverda Dave:
Julie, You can text quicker then me!

Nurse Julie:

--- Quote from: Laverda120 on March 12, 2019, 08:10:57 PM ---Julie, You can text quicker then me!

--- End quote ---
Not very often that happend but the veg was just about cooked so had to get a move on  ;D ;D

Navigation

[0] Message Index

[#] Next page