SOHC.co.uk Forums > Recommended Sources for Parts and Services

Does what is says on the tin ISH

(1/2) > >>

Rozabikes Tim:
Bought this rediculously cheap valve compressor on ebay for less han £9 delivered! Was  always going to be shite  I even looked at a utube video saying so but it did basically work. So thought what could it do wrong with quite a simple mechanical process and bought one.

Hey ho, the build quality was shite and I had to file some rough metal off spring locating socket thingy. Having done that it worked very well. Threads used to compress the spring on the g clamp bit of it were a very sloppy fit.

Anyway it does the job easily for us ocasional mechanics who may never even use it again. And £9 quid, why not!!

[ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]

Green1:
Dam I think I payed £10 for mine  ;D
I can confirm crap but works on a CG

Rozabikes Tim:
Dam this technolgy. 3rd picture didn't load!
[ Guests cannot view attachments ]

Bryanj:
Looks same as genuine Honda one, biggest mistake people make is trying to loosen collets by winding the threaded bar down and bending the frame. You need to loosen the collets with a socket and hammer first.

Seamus:
Agree with the hammer and socket. Gentle tap or you could find bits flying in all directions.  ;D

Navigation

[0] Message Index

[#] Next page