SOHC.co.uk Forums > CB750

Complete engine gasket set suppliers?

(1/1)

martin_uk:
Working on my fourth and final CB750 SOHC and need an engine gasket kit preferably with the cylinder stud packers/seals.

Previously bought from Cruisin Image, but prices seem to have gone up alot. :o

Vesra ref is VG-157 and hoping to find a set at sub £50 delivered  8)

Any suggestions

MrDavo:
I used a Vesrah Kit, from D Silver, I think, which had everything, including seals, O rings and rubber pucks that I needed, however on the strong advice of the sages on this board I used a genuine Honda head gasket, which was visibly much higher quality, with a 'sticky'coating, and you don't want to take the engine out again if it fails.

Mine came from CMS, I'm afraid the price will make your eyes water, though, over £100 with VAT and carriage.

Trigger:
You won't find a VG-157 under £50. You will find them a tad over in the states but, with P&P and customs you will find one at that price in europe  ;)

martin_uk:
Thanks for the suggestions guys

Navigation

[0] Message Index