SOHC.co.uk Forums > CB350/400
Front brake question
taysidedragon:
It's the bore in the arm for the pin that seems to have worn. I've ordered a 'new' arm.
Hopefully it will be fine.
hairygit:
--- Quote from: taysidedragon on May 08, 2019, 12:14:13 PM ---It's the bore in the arm for the pin that seems to have worn. I've ordered a 'new' arm.
Hopefully it will be fine.
--- End quote ---
You should see if you can get a new pin as well, that way it's all new parts together!
Sent from my X6pro using Tapatalk
taysidedragon:
--- Quote from: hairygit on May 08, 2019, 12:18:36 PM ---
--- Quote from: taysidedragon on May 08, 2019, 12:14:13 PM ---It's the bore in the arm for the pin that seems to have worn. I've ordered a 'new' arm.
Hopefully it will be fine.
--- End quote ---
You should see if you can get a new pin as well, that way it's all new parts together!
Sent from my X6pro using Tapatalk
--- End quote ---
DSS sell new pins, but my steel pin shows no wear. All the wear is in the aluminium arm, allegedly! ☺
Bryanj:
Drill and tap housing for a grease nipple and lube it regularly.
Lobo:
Hi Tayside,
6 yrs ago (!) I started this thread - found it now / may shed some light on your issue?
Simon.
http://www.sohc.co.uk/index.php/topic,4934.0.html
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version