SOHC.co.uk Forums > CB750

341 repo exhaust fitting issues.

(1/4) > >>

casperdog:
Sorry if this has been covered before but bear with me please  :)
I'm having a few problems making them fit and would like to ask a question regarding the left hand upper.
Can i ask if anyone has a set of 341 repo's on their 750 would they be kind enough to take a look at the left upper and see where the top seam lies.
On my original set of exhausts the seam is directly in line with the end of the footpeg bracket stud.
[ Guests cannot view attachments ]
But on the repo one the seam is about 15mm further out from the end of the stud.
[ Guests cannot view attachments ]
I would be interested to know if they are all like this or just mine because one issue i'm having is the side stand hitting the pipe.
Many thanks in advance
Phil

Trigger:
Most of my repro sets sit 4 to 8 mm  and on original oem that i have fitted they are in line to 7mm. Non of my 750's are 15mm  ;)

Are you sure that is the right side stand ?

casperdog:
I did thinks of that and had a look at the image on the parts list and it looks the same. Different to the k3 and k4 because it has that "loop" welded on the front
The bike is a USA k5.
Thanks

Trigger:
Never met a USA K5 but, just did a search on the side stand and it is correct. The UK K6 was fitted with the old type side stand. There should be a member with a K5 that could compare  ;)

casperdog:
Thanks trigger, the bike came with a set of oem pipes on (but with holes) and when they are fitted the stand is well clear, so i don't think that is the problem.
The new upper exhaust definately sits slightly further out and wanted to ask if it was normal for these repo's.
Cheers
Phil

Navigation

[0] Message Index

[#] Next page