SOHC.co.uk Forums > CB350/400

Rotor removal tool

<< < (3/5) > >>

Sprocket:
ill octopus!  ;D
https://www.ebay.co.uk/itm/M18-X-1-5-PITCH-X-45-FINE-PITCH-HEXAGON-BOLT-BZP/272510162261?ssPageName=STRK%3AMEBIDX%3AIT&var=571579385136&_trksid=p2057872.m2749.l2649

bucksfizz:

--- Quote from: ka-ja on June 04, 2019, 12:16:14 PM ---For the purists, there is a difference between metric and imperial threads, the thread angle is 60degrees for metric, imperial 57degrees

--- End quote ---

From memory:

BA used a 47.5° thread angle, Whitworth 55°, and Unified (UNF, UNC, etc.) 60°.
I have a few British clunkers, so I have to fight with these thread forms all the time.
I'll get my coat...

Bryanj:
And i used to pee the plant apprenticles off when they came and asked for a 10mm bolt meaning a 10mm spanner size and i gave them a real 10mm bolt!!!!

ka-ja:
Or send an apprentice to the tool stores for a set of footprints!

taysidedragon:
Or a 4 inch hole! 😂

Navigation

[0] Message Index

[#] Next page

[*] Previous page