SOHC.co.uk Forums > CB350/400

Engine oil use?

<< < (5/11) > >>

Bradders:
Thanks very much. Will have a go later today and see how I get on.

K2-K6:
You can use a piece of clear tube to suck up liquid and then put it into the cylinder get in there easily.

Just make sure it's long enough so you don't "inhale" the brew of choice when you suck on it ;D

Andych:
Should be no need to inhale... simply insert said piece of tube into the liquid and put a finger over the end. you should be able to lift out however much is in the tube as long as you keep your finger sealed on the end.
At least that is the theory..... :)

Bradders:
Just wanted to thank Julie and K2-K6 for their advice with regards to my high oil consumption and the “How to” guide on putting oil down my bores. I would not of felt confident enough to do it without there advice. Keeping my fingers crossed that it fixes the problem. 🤞

Nurse Julie:
Yes, fingers crossed for you Bradders. This is all part of the DIY 'diagnostics' process. Start with the simple things you can do for yourself first. Well done. Give us an update sometime.

Navigation

[0] Message Index

[#] Next page

[*] Previous page