Other Stuff > Misc / Open

Picture for Hairygit

(1/3) > >>

Trigger:
Thank you for all your time last year with the charging problem on my 750 charging with the headlight on. I had time today to strip it down and found a few melted wires in the main loom. This may be because when i put the first regulator on it, was pushing out more than 16v.

[ Guests cannot view attachments ]

hairygit:
That certainly wouldn't help! What condition are the connectors in, bright and shiny or dull/corroded? Dull or corroded connectors drastically increase resistance, and create a lot of heat, a common fault especially with fuseboxes on old bikes.

Sent from my X6pro using Tapatalk

Bryanj:
Thats where 33% of your charging current went.
Bet its all good with the wire fixed, stong beasts these Honda systems(except Goldwing ones)

Moorey:
A good result. Its always nice when you find something. Out of curiosity had the yellow completely broken or did you notice if there was still a odd strand of wire to the connector.  :)

Trigger:
Still a few strands  :o
Were do these three wires end up ? I take it that i will have to strip the loom and replace the damaged yellow wires.

Navigation

[0] Message Index

[#] Next page