SOHC.co.uk Forums > CB750
Fuel tap o-ring
casperdog:
Hi, does anyone know the size of the o-ring that seals the lever on this type of tap... or a link to an eBay item?
Many thanks
Phil
Bryanj:
If you mean on the lever dont think its an O ring and its a flat version tap to tank from memory only available in a strainer kit for many pounds.
casperdog:
Definitely an o-ring...on this one at least😊 sits on the back of the lever behind the front plate..will take it apart again and measure. It's seeping fuel from the front of the tap.
Cheers
Phil
casperdog:
O-ring in question....diameter on lever is 19.0mm and bore it sits in is 22.25mm. Going to order 19mm ID, 2mm section.
Cheers
Phil
ka-ja:
My tap has a corregated washer type spring not an o ring, I would check further if I was you, previous owner repair?
Navigation
[0] Message Index
[#] Next page
Go to full version