Fuel tap o-ring

[casperdog]

Hi, does anyone know the size of the o-ring that seals the lever on this type of tap... or a link to an eBay item?
Many thanks
Phil

[Bryanj]

If you mean on the lever dont think its an O ring and its a flat version tap to tank from memory only available in a strainer kit for many pounds.

[casperdog]

Definitely an o-ring...on this one at least😊 sits on the back of the lever behind the front plate..will take it apart again and measure. It's seeping fuel from the front of the tap.
Cheers
Phil

[casperdog]

O-ring in question....diameter on lever is 19.0mm and bore it sits in is 22.25mm. Going to order 19mm ID,  2mm section.
Cheers
Phil

[ka-ja]

My tap has a corregated washer type spring not an o ring, I would check further if I was you, previous owner repair?

[Moorey]

It's the same type of tap as mine on the F model and should have a o ring.

[casperdog]

Just had a look at the drawing for the K5 (should have mentioned the model) and matches what I've got. Shows the o-ring behind the tap lever.