SOHC.co.uk Forums > CB750

Gear Box Outer Cover

(1/2) > >>

bucksfizz:
I'm trying to track down why I'm getting 0 volts at the oil pressure warning light.
I suspect that the oil pressure switch has failed.
My limited knowledge of these bikes tells me that the switch is located at the back of the crankcase on the left side.
As such, I'm trying to remove the outer gear box cover, but it goes only so far:

[ Guests cannot view attachments ]

I can get my finger tips in between the cover and the crankcase, but the wretched cover won't budge any further.
How do I remove this cover without resorting to brute force and ignorance?

BTW, a fair amount of oil came out, which I wasn't expecting.

Nurse Julie:
The oil pressure switch is under this rubber cover, which is on the right of the engine.

[ Guests cannot view attachments ]

bucksfizz:
Doh!
Thanks for the info - I'll just button up the gear box outer cover.
(If there were a red-faced icon, I'd use it.)

Nurse Julie:
Don't forget to check your oil level when you have buttoned it all up 👍👍👍👍

Bryanj:
Should get 12v between black wire at bulb and ground, the wire to switch grounds the bulb to make it lite up

Navigation

[0] Message Index

[#] Next page