SOHC.co.uk Forums > CB350/400

BRAKE FLUID LEAK FROM MASTER

(1/2) > >>

cbradley400/4:
Can anyone advise with this little problem ?
I appear to have hydraulic fluid leaking in small spots on to the petrol tank of my 400/4.
The cap has not been off for some time?
Many thanks.

mick:
Hi i would wash off the spills with some soapy water first, then check that the cap is on correct and tight ,also check the banjo bolts are tight and also the brake hose itself for signs of splitting etc, cheers Mick.

cbradley400/4:
Thanks,i'll check that out.

bikerburke:
hello i had a similiar problem when i was rebuilding my 500/4 turned out to be the master cylinder,you may see fluid by the brake lever pivot if so you probaly need a rebuild kit and a pair of long nose internal circlip pliers.cheers  bikerburke

cbradley400/4:
Many thanks,belatedly.

Navigation

[0] Message Index

[#] Next page