SOHC.co.uk Forums > CB350/400

Which Exhaust System Should I Fit

<< < (2/3) > >>

TKMSteve:
I must admit it was only the last two months that I came across this forum. I wish it had been sooner as there is so much great information on here about the 400/4. When I came across the forum I had already stripped the machine down to bare frame, derusted, painted and rebuilt. Same with engine. So had to discover so much for myself during this process. Ah well.
At the stage now of finding all the broken insulation in the handlebar switches causing short circuits in the electrics. Fiddly little things but hopefully sorted now. Will try this evening.
The carbs were an absolute shocker. Slides seized solid. Hope I haven't damaged the bottom ends too much using a lever to shift them.
Petrol tank is rusted through underneath, found at least 6 pinholes that I've repaired with solder but I think a replacement tank has to be the answer.

AshimotoK0:
My tip of removing pistons (slides)  from carbs is to plunge them in boiling water (the 'gum' deposits soften and they then usually pull out quite easily).

This will give you an idea on value of the standard system ... would be around £3k landed in the UK   :( :o

http://www.yamiya750.com/index.php?main_page=product_info&cPath=179_274_195_231&products_id=4036


Their own replica downpipes look great but are only single skinned, which is a real shame ... gawd knows why they can't make them  double skinned ... after all they achieved the double-skin on their CB750 pipes.

paul G:
Feck me I have one stuffed under the spare bed  ;D ;D

Andych:
Good god... even without freight that would be close to A$5K... The DS one is a steal compared to that price.
I may have a lead on a really good set..I just have to convince the owner that they wouldnt suit the Cafe Racer look he is going for... but if it falls through I will go for a Delkevic system.
Looks to be period correct (as if anyone in their right mind would have swapped out the factory system for another 4 into 1) and I am told they sound pretty good. I havent found a decent sound file or youtube video yet though.

K2-K6:

--- Quote from: Andych on August 10, 2019, 01:54:46 AM ---Good god... even without freight that would be close to A$5K... The DS one is a steal compared to that price.
I may have a lead on a really good set..I just have to convince the owner that they wouldnt suit the Cafe Racer look he is going for... but if it falls through I will go for a Delkevic system.
Looks to be period correct (as if anyone in their right mind would have swapped out the factory system for another 4 into 1) and I am told they sound pretty good. I havent found a decent sound file or youtube video yet though.

--- End quote ---

If you are in a position to buy one,  you could go for a delkavic yourself and see if you can tempt the original pipe owner into a swap for your new pipe if the cost makes a reasonable trade for you.

They look really well made and quite impressive when in front of someone and fitted to a bike.  They do seem to fit more with a café racer look than std pipe too. 

Could be a way of getting what you want as you'll have a worst case scenario of ending up with the delkavic yourself,  no bad thing at all.

Navigation

[0] Message Index

[#] Next page

[*] Previous page