SOHC.co.uk Forums > CB750

bulb fittings

(1/2) > >>

ace cafe racer:
I presume the empty holes in my clocks are for lighting them. I have searched the internet for fittings but am at a loss. Can anyone point me in the right direction to obtain the fittings and wiring.

Menno:
They should look something like this:

https://www.ebay.de/itm/Honda-CB-750-Four-K2-K6-Kabel-Drehzahlmesser-Tachometer-Cable-Socket-Speedo/163692188504?fits=DEM_Make%3AHonda%7CDEM_Model%3ACB%7CDEM_StreetName%3AFour&hash=item261cd09358:g:CWkAAOSwYThc3Rhu

Trigger:
The hole you are seeing in the clock cups is the cable hole. The rear of the clocks have two holes per clock and you have to use the Honda bulbs as other bulbs are too long and burn the back of the face plates.
To get the bulb holders you will have to put your hand deep in your pockets.

mike the bike:
or use LED ones which don't get hot and are brighter

ace cafe racer:

--- Quote from: Trigger on August 10, 2019, 08:58:18 PM ---To get the bulb holders you will have to put your hand deep in your pockets.

--- End quote ---
No wonder then why they are missing  >:(

Navigation

[0] Message Index

[#] Next page