SOHC.co.uk Forums > CB750

Looking for a connector block

(1/2) > >>

Seamus:
Still in the throes of dismantling my K1 and have removed the battery tray and other brackets for renovation.
I noticed that I did not have a fuse box  ??? and also that the connecting plug to the rectifier had been removed and the wires soldered together.
Not much chance of buying these seperately without replacing the rectifier and harness. (Both basically OK)
Anyone got these (or either half) lying around that they wish to part with?

Please pm with info. I am happy to pay for them

Cheers

Seamus

Bryanj:
K1 only had single fuse not fuse box

JonnyB:
I used these, they are not an exact match, but hidded behine a side panel you can't see them
http://www.vehicle-wiring-products.eu/VWP-onlinestore/connectors/multiconnectors.php and they also do the japanese bullet connectors too
http://www.vehicle-wiring-products.eu/VWP-onlinestore/terminalsnonins/noninsbullets.php

BigAl (Alan):
Would agree with JonnyB.  Vehicle Wiring products do a handy cataloge/quick delivery
The japanese bullet connnectors and shrouds are very good and look the part on this bike

Alan

Bryanj:
They are a fractionaly different size, I think the bullets are slightl bigger from memory which makes a good fit into the Honda loom connectors just crimp up the females a bit to make the original bullets fit tight----sounds a bit perverted when i re read that!

Dont forget the 2 and 3/4 way females with shrouds when you order

Navigation

[0] Message Index

[#] Next page