SOHC.co.uk Forums > CB750

K1 brake wire rating?

(1/1)

Andrew-S:
Hello folks,

One of the wires to the hydraulic front brake switch on my K1 is pulling/fraying away from its bullet connector/plastic sheath as the wires were pretty tight. So I need to do some repair work to both connectors and lengthen the wires slightly and want to reuse the original connector/sheaths - can some please advise to the wire rating?

Thanks,
Andrew

Andrew-S:
Found it!  - the rating is stamped on the black wire: 0.75  ::)

Navigation

[0] Message Index