SOHC.co.uk Forums > CB350/400

Timing adjustment at limits

<< < (3/3)

Deano400:

--- Quote from: K2-K6 on September 07, 2019, 07:14:57 PM ---Yes the 0.3 mm should retard the timing a little and reduce the need to rotate the plate clockwise.

That should give you a bit more room to get it correctly matching the correct timing position.

--- End quote ---

Do as K2-K6 says. I had the same problem and all was resolved by setting the points gap to 0.3 mm.

Navigation

[0] Message Index

[*] Previous page