Other Stuff > Tricks & Tips
Tank sealing with POR 15, stolen tips from GSresources
AshimotoK0:
--- Quote from: Moorey on September 10, 2019, 08:44:52 AM ---A hot air gun would be hot enough to to cause autoignition in isopropanol without the need from sparks from the motor or the vapour reaching the heating elements to ignite it.
--- End quote ---
Yea but the write-up stated a hairdryer ...mind you my daughters hairdryer gets almost as hot as some hot air guns ;D
Greg65:
Daughters! You have my deepest sympathy, I had one sister and that was enough. Your elec bill must be horrendous as well as phones! Mind you one son on an an advanced drinking course at Uni is fairly eye watering. ;D
Moorey:
--- Quote from: AshimotoK0 on September 10, 2019, 09:17:05 AM ---
--- Quote from: Moorey on September 10, 2019, 08:44:52 AM ---A hot air gun would be hot enough to to cause autoignition in isopropanol without the need from sparks from the motor or the vapour reaching the heating elements to ignite it.
--- End quote ---
Yea but the write-up stated a hairdryer ...mind you my daughters hairdryer gets almost as hot as some hot air guns ;D
--- End quote ---
You just know someone somewhere will use a hot air gun cos its faster. ;D
JezzaPeach:
I would advise when opening and pouring POR-15 sealant, to cover your skin, arms, hands, including not having your shirt open or neck exposed, and do it in the open with a fan blowing the fumes away from you. I developed a rash and blisters that took several weeks to go.
I used cling film trapped under the filler cap for some of the rinsing stages, and a small drilled piece of wood and piece of inner tube to seal the petcock hole.
Navigation
[0] Message Index
[*] Previous page
Go to full version