SOHC.co.uk Forums > Project Board

Lets build a SOHC for less than a grand

<< < (22/44) > >>

eight0:
Trigger, Take a look at this site if you haven't seen it already. https://blacksquaremotorcycle.com/dual-disc-conversion/

He explains about mounting the second caliper with both the round and cut out hub designs.

Bryanj:
Thats a very interesting article, might be worth putting in tricks and tips.
I know the "oval" did carry over into the US 550 K series for a while as i bought a few from Dave Silver, 750 hubs also perhaps Trigger knows when they changed.
When i did it it was with 500 front wheels which were deffinately of the "oval" of "flanged" type so the discs were symetrical.

SteveD CB500K0:
Interesting.

Google Kyril Dambuleff.

I will ask him if we can reference his work.

Steve


Sent from my iPhone using Tapatalk

Trigger:
Thank you for the link eight0. I had read it but, what I have found is there are so many different fork bottoms on the 550's and 750's that you should never assume yours will be the same.

I used a cut away early hub but, I could not understand the speedo drive for it. The one I have will not sit in the cut away and the drive would not go in to the ID of the disc.

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

Trigger:
And finally the disc centre hole  :o If you do the maths from the pictures, nothing adds up.


[ Guests cannot view attachments ]

Navigation

[0] Message Index

[#] Next page

[*] Previous page