SOHC.co.uk Forums > Project Board
Lets build a SOHC for less than a grand
Erny:
Thanks a lot, now it is clear!
Another item I'll address during looong winter
Any particular grease you would recommend?
Looks mine is turning rather difficult, I suspect grease degraded or too thick
Trigger:
Any new grease is better than old grease :o
I just use some high temp stuff that is green and comes from Lucas ;)
Trigger:
Not much happening with this build, still waiting on all the frame and metal to be painted. Have the crank cases back from the strippers. Just have to remove the old corrosion that was under the old paint and lacquer and it will be ready to have all the threads chased and paint.
Will have to kick the painter soon as, I will soon have the bottom end ready and will put the bottom end in the frame and build up the top end.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
Trigger:
I think I pulled the short straw with the deal on the powder coating. Ended up peening for him nearly all day but, at least all the metal parts are coated.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
Trigger:
When you are doing this prep work, you always forget something and this time it was to mask up the top shock mount threads. It came out OK, even starting with a old rusty frame.
Also did a few other bits and I have never had a 500 four swinging arm next to a 750K. I was surprized that the 750 arm is a lot shorter.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version