SOHC.co.uk Forums > Project Board

Lets build a SOHC for less than a grand

<< < (11/44) > >>

Colonial-Clive (yindi):
That answers a question I had in mind about the swing arm on my 500 frame, it’s a 750 one. It don’t half sharpen up the handling.

Trigger:
I was thinking sort wheel base  ::) Does your have a std rear sprocket and how many links is your chain ?

royhall:
Does the wheel still look centered on the rear mudguard?

Sent from my Pixel 3a XL using Tapatalk

Trigger:

--- Quote from: royhall on December 22, 2019, 11:24:16 AM ---Does the wheel still look centered on the rear mudguard?

Sent from my Pixel 3a XL using Tapatalk

--- End quote ---

I have just fitted it loosely and it is in the centre to the frame.

The 500 four arm is
241mm ID rear ( at the wheel spindle )
228mm OD at the front
425mm from the centre of the swing arm mount to the centre of the swing arm shock mount.

The 750K arm is   
242mm ID rear ( at the wheel spindle )
228mm OD at the front
390mm from the centre of the swing arm mount to the centre of the swing arm shock mount.

That's a difference of 35mm and this is my concern's. This will be a different rake / angle on the rear shocks and what effect would that bring with a 750K arm fitted to a 500 four ?

Trigger:
Been throwing some parts on the frame to see what I have missing. Still got a 20kg bucket at the zinc platers and will not know on the fasteners until that is back.

The relocation of the ignition switch worked out well. Found a old switch in a parts box but, not sure if it is any good.



[ Guests cannot view attachments ]


[ Guests cannot view attachments ]


[ Guests cannot view attachments ]

Navigation

[0] Message Index

[#] Next page

[*] Previous page