SOHC.co.uk Forums > Project Board
Lets build a SOHC for less than a grand
K2-K6:
Some of the newer bulbs are really good in these H4 fit units.
https://www.powerbulbs.com/product/philips-white-vision-ultra-h4-twin?gclid=EAIaIQobChMIxI6NrqP35gIVA7DtCh1Y1AjxEAQYBiABEgJ4LvD_BwE
These above are worthwhile as they move the colour balance more from older yellow to closer in match to more current blue types (4200 K rating), both Phillips and Osram are technically very good quality.
You can't buy them for 99p though Graham ;D
Trigger:
--- Quote from: K2-K6 on January 09, 2020, 07:53:20 PM ---Some of the newer bulbs are really good in these H4 fit units.
https://www.powerbulbs.com/product/philips-white-vision-ultra-h4-twin?gclid=EAIaIQobChMIxI6NrqP35gIVA7DtCh1Y1AjxEAQYBiABEgJ4LvD_BwE
These above are worthwhile as they move the colour balance more from older yellow to closer in match to more current blue types (4200 K rating), both Phillips and Osram are technically very good quality.
You can't buy them for 99p though Graham ;D
--- End quote ---
I did have a weird drain problem on a 750 last year and Hairygit advised that I try a LED headlight bulb. Tried these and they worked well >>> www.ebay.co.uk/itm/2pcs-H4-18W-2000LM-Motorcycle-LED-Headlight-Bulb-6000K-3-COB-Hi-Lo-Beam-Light/362653275661?hash=item546fd1d60d:g:ysIAAOSwXD5c331J
K2-K6:
Oooh, that'll be interesting. Are you going to use one of those in the Cibié?
Trigger:
--- Quote from: K2-K6 on January 09, 2020, 09:09:36 PM ---Oooh, that'll be interesting. Are you going to use one of those in the Cibié?
--- End quote ---
Not sure yet. Bought a trade pack of 10 so, have a load of them ;D
Trigger:
Did a little bit more today. I will not be having the pilot lights and will just have a oil pressure light fitted in the stem nut.
Was trying to find a good set of secondhand bars, most are bent but, did find a old set of 550 F ones that will work. While going through all the bars I did notice that most sellers of the UK 750K bars list them at 2.5" rise when the original ones are 2 1/4" rise :o So started looking at listings UK 550F bars and they are listed as 2.5" rise when, they are 2" rise on the original bars.
Very easy to spot original OEM bars as they have the dots on them for lining up.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version