SOHC.co.uk Forums > CB750

CB750 K2 bottom yoke - I don't think mine's standard . . .

<< < (2/2)

the-chauffeur:

Can't find a thumbs up emoji . . .

Thanks again.  Yip, that's what mine looks like.

On the subject of rivets, am I right in thinking I should be looking for drill screws to replace that kind of rivet with?  I've got a similar issue with the VIN plates, insofar as I'm not sure what type of rivet to use to replace the ones that have been drilled out (for frame powdercoating).  And any pointers on sources would be really helpful 'cos I can't find any that can be easily had in the UK.

Trigger:

--- Quote from: the-chauffeur on November 29, 2019, 12:59:58 PM ---
Can't find a thumbs up emoji . . .

Thanks again.  Yip, that's what mine looks like.

On the subject of rivets, am I right in thinking I should be looking for drill screws to replace that kind of rivet with?  I've got a similar issue with the VIN plates, insofar as I'm not sure what type of rivet to use to replace the ones that have been drilled out (for frame powdercoating).  And any pointers on sources would be really helpful 'cos I can't find any that can be easily had in the UK.

--- End quote ---

The rivet on the lock cap can be pulled out very carefully and reused
The rivets on the VIN plate are part number 90841001000  ;)

Navigation

[0] Message Index

[*] Previous page