SOHC.co.uk Forums > CB350/400
Rear brake retaining spring.
Dolomite_:
I've referenced some pictures and It appears that I have the retaining spring next to the rear brake lever in the right place but there still seems to be quite a bit of play in the brake lever. The adjuster nut on the wheel end is compressing the spring that end quite a lot and if I keep turning the nut to take out the play it will be fully compressed.
Could anyone upload some pictures of the 2 springs so I can compare?
Moorey:
Are you sure the brake lever arm is in the correct position on the splines into the drum.
Nurse Julie:
Also to add to the above, have you got the rear brake adjuster rod in the correct position at the angle part at the front? I will take a photo in a minute.
Nurse Julie:
That's a piece or rubber on the end of the spring, so me frame doesn't get scratched 😊😊😊
[ Guests cannot view attachments ]
Dolomite_:
Thanks all. Got that job ticked off, now onto the next one.
Navigation
[0] Message Index
[#] Next page
Go to full version