SOHC.co.uk Forums > CB350/400

Cam chain tensioner bolt

<< < (4/4)

AndyD:
Dave,
I agree, the kit seems well made and so far easy enough to fit.
The oven I got was an Electriq 70 liter one- it was the cheapest one I could find with a 13amp plug and available quickly - only used it briefly so far but seems fine and CB400F crankcases fit in sitting flat on the mesh shelf which is handy.
Welcome to use it if you're not too far - it's one of those things that won't get much use but really handy to have in the shed now and then I guess.
Have to admit I've never even dreamed of trying to use the o/h oven or dishwasher - I'd never get away with it!
Cheers,
Andy

Laverda Dave:
Thanks Andy.
The dishwasher is very handy to clean wiring looms, and they come up like new! Make sure you use a dishwasher cleaning solution afterwards though and before the o/h gets home!

waffey:
Had my lower engine case returned from the engineering shop with the snapped cam tensioner bolt removed, redrilled with the Ebay replacement. All good

Navigation

[0] Message Index

[*] Previous page