SOHC.co.uk Forums > CB750
Bottom hanger bolt.
hairygit:
The bottom rear is unique to the 750F2, none of the other SOHC 750's use those alloy footrest brackets. Try D.K. spares or similar for one.
Sent from my POT-LX1 using Tapatalk
brodsord:
--- Quote from: hairygit on January 20, 2020, 08:49:41 PM ---The bottom rear is unique to the 750F2, none of the other SOHC 750's use those alloy footrest brackets. Try D.K. spares or similar for one.
Sent from my POT-LX1 using Tapatalk
--- End quote ---
Thanks pal, I think the bolt that’s there must be of an earlier model, the bike is a bit mix and match
Sent from my iPhone using Tapatalk
Trigger:
--- Quote from: brodsord on January 20, 2020, 08:44:32 PM ---
--- Quote from: Trigger on January 20, 2020, 08:14:01 PM ---I have 750K bolts, if you would like the length. The front lower is 90152300010 for the K and F1 and F2 ;)
--- End quote ---
Thanks very much Trigger.
I’m doing a build which is a f2 frame and a k5 engine.
The rear bottom bolt seems to be to short by the time it goes through the frame then out the aluminium peg mounting blocks.
I haven’t got enough thread to mount the forward foot rests, I got the bike as just a rolling frame and engine it had nothing else so I’ve been slowly sourcing parts and putting here back together and the front mount is just a bit of m10 threaded rod, do you have a spare rear lower and the front clutch side bolt for sale at all?
Sent from my iPhone using Tapatalk
--- End quote ---
If you contact the Nurse, she will check the stock. I have seen a 750K lower front and a rear hanger bolt about ;)
brodsord:
--- Quote from: Trigger on January 20, 2020, 09:47:06 PM ---
--- Quote from: brodsord on January 20, 2020, 08:44:32 PM ---
--- Quote from: Trigger on January 20, 2020, 08:14:01 PM ---I have 750K bolts, if you would like the length. The front lower is 90152300010 for the K and F1 and F2 ;)
--- End quote ---
Thanks very much Trigger.
I’m doing a build which is a f2 frame and a k5 engine.
The rear bottom bolt seems to be to short by the time it goes through the frame then out the aluminium peg mounting blocks.
I haven’t got enough thread to mount the forward foot rests, I got the bike as just a rolling frame and engine it had nothing else so I’ve been slowly sourcing parts and putting here back together and the front mount is just a bit of m10 threaded rod, do you have a spare rear lower and the front clutch side bolt for sale at all?
Sent from my iPhone using Tapatalk
--- End quote ---
If you contact the Nurse, she will check the stock. I have seen a 750K lower front and a rear hanger bolt about ;)
--- End quote ---
Will do Trigger.
Thanks
Gray
Sent from my iPhone using Tapatalk
Navigation
[0] Message Index
[*] Previous page
Go to full version