SOHC.co.uk Forums > CB500/550

engine rebuild

<< < (3/3)

MIKE550/4:
cylinder to head ,have none to the crankcase  :-\

MIKE550/4:
hi all

cannot get the cam to sit correctly,feeding it in from the right , seems the cam chain keps getting wedged, any tips

2 questions on fitting the cam cover, realise i have to set cam and mark in timing window my book has big oily print on it and not very clear, is it notch level with cylinder head joint face? and line in between t and f markings in the middle of window at bottom?

also noticed fitting cam cover on the cylinder head can cause problems ( bent valves?) so whats the process to avoid this




cheers

mike

Bryanj:
Mike use this link:-

http://forums.sohc4.net/index.php?topic=369.msg57914#msg57914


And i will try and call tonight

MIKE550/4:
i am doing some thing wrong tried all afternoon with no joy  >:(, seems realy tight, can get one side on, but will not go over the top, gave up now before i break the chain, will await your input  :)

Navigation

[0] Message Index

[*] Previous page