SOHC.co.uk Forums > CB500/550
Brake switch
Woodside:
Is there an easy way to test the front brake switch on the 500.
It would be nice to know before I tidy it up and fit and fill the system
Thanks in advance
Bryanj:
Not easy without pressure only ever known 1 go wrong, and that was under Honda warantee
Woodside:
Ok
Thing is
I have 3-4 here and all have been off a bike for at least 5 years if not 10+
So god knows what condition they are in.
Perhaps I will sort them all at least one must be ok
Lobo:
... I guess the most obvious thing to do is to check each one is open circuit before you bother fitting it/them. (Ie if continuity is present in the dry / unpressurised state then it’s probably duff)
deltarider:
Have you checked p.103 of the Shop Manual Honda CB500-550? https://www.classiccycles.org/media//DIR_1653304/DIR_1653404/DIR_1653507/ecc6759db0a214d5ffff8820ffffe41e.pdf
Navigation
[0] Message Index
[#] Next page
Go to full version