SOHC.co.uk Forums > CB350/400

Blown fuses

<< < (9/12) > >>

Bryanj:
That diagram is a schematic not literal.
Main loom is the big bunch of wiring along the bike front to back. Main panel is where the regulator, rectifier, flasher relay and solenoid are fixed.
I will look in my garage and see if i have a 550 one spare to look at, mostly i have 500 so not sure.

Oggers:
Ok understood. Rectifier has multiplug connector, regulator has 3 spade connectors - white black green, flasher relay two spade  connectors, solenoid as per wiring diagram. No large connector to main loom that I can see.

Nurse Julie:

--- Quote from: Bryanj on April 05, 2020, 09:54:14 PM ---That diagram is a schematic not literal.
Main loom is the big bunch of wiring along the bike front to back. Main panel is where the regulator, rectifier, flasher relay and solenoid are fixed.
I will look in my garage and see if i have a 550 one spare to look at, mostly i have 500 so not sure.

--- End quote ---
It's a 400 Bryan.

Oggers:
Forgive my presumption here, but surely that black connector and wire to the regulator must not be grounded. If so, it would provide a clear short path for the hot/feed wire direct from the ignition key, and surely blow the 15A fuse?

mike the bike:
Any black wire, treat as 12V and deffo not to be earthed.  All earth wires are green.  Not green/yellow - green

Navigation

[0] Message Index

[#] Next page

[*] Previous page