SOHC.co.uk Forums > CB350/400
Blown fuses
Lobo:
...I’d reckon job done; and indeed it seems the Regulator has gone bad describing the 3 checks you did.
The last bit of your puzzle will be confirmation with a 15A fuse in place... but Regulator disconnected of course.
Seems an odd sort of failure... has the Regulator Black contact somehow bent / contacted the body?
Regardless, hopefully well done.
Simon
Bryanj:
The proper 400 reg has contacts that poinr sideways whilst the other fours point downwards perhaps the wrong one fitted
Oggers:
Simon/Bryan
Firstly many thanks to you both. Would not have found it without you.
Yes - for sure I will reconnect everything except the regulator, insert fuse, turn the key and see what happens. It had better not blow!
I'll pull the regulator off to see if I can find anything obvious, but yes, a little odd for sure. I never touched it! Some elderly capacitors in there, so I guess they have a shelf life.....
Pins point outwards by the by
May invest in the reg/rec combo as a fix....
Bryanj:
No capacitors, all coils n points.
Bryanj:
Have you stopped the blowing fuses?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version