SOHC.co.uk Forums > Project Board

Frame Paint Question

(1/1)

SPR:
Afternoon

I'm wondering if anyone has any recommendations for spray paint for the frame ?

The frame downtubes want rubbing down and I'd rather get a spray finish than brush ... also semi gloss if possible.

I've heard that Hammerite smoothrite is OK but takes an age to cure.

Anyone used Eastwood spray ?

https://www.demon-tweeks.com/uk/eastwood-extreme-chassis-black-paint-397g-aerosol-1241859/

Any other suggestions ?

Thanks

Simon

Green1:
Rust-oleum Combicolor is far superior to Hammerite.
I use there products all the time as I have never had any bad feed back

It gives just the right sheen level. It is avalable in a spray but I would brush it on as it dries brush stroke free and you will get more on.
All modern oilbased products take an age to dry now.

SPR:

--- Quote from: Green1 on April 10, 2020, 02:39:58 PM ---Rust-oleum Combicolor is far superior to Hammerite.
I use there products all the time as I have never had any bad feed back

It gives just the right sheen level. It is avalable in a spray but I would brush it on as it dries brush stroke free and you will get more on.
All modern oilbased products take an age to dry now.

--- End quote ---

Thanks

I've been using combicolor for the small touch ups etc so just perhaps need to get stuck in :)

Navigation

[0] Message Index