SOHC.co.uk Forums > CB350/400
No spark
yozzer74:
bryanj to be fair the loom does look in good condition.
yozzer74:
what way do you think i should go about this try get it running first or just jump straight in on strip down
Bryanj:
Get it running first
billywingnut:
I think you are right Yozzer get it to run first see how it runs /sounds. I bought a battery and oil and started it to find smoke and rattles, I'm glad I decided to strip down because the sump was full of gunge both chains required replacing and the valves required re-grinding, the headstock bearings were notchy, basically all the things you would expect as part of servicing needed checking. The loom should be ok. I replaced the bullets and sockets on the ends of all connectors because i had intermittent issues with the electrics. I removed all bits of wiring that didn't belong ( heated grips etc)
SteveD CB500K0:
Heated grips??? !!!
Sent from my iPhone using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version