SOHC.co.uk Forums > CB350/400

Front fender hardware

(1/2) > >>

mattsz:
I removed the U-shaped front fender "strut" from the fender (my '77 USA model only has the rear lower horizontal strut) to clean up some inner fender rust.  The strut is fastened with two chrome (well, shiny) oval head screws, split locking washers and nuts, with formed plastic spacers between the strut and fender.  One came off easily... and one screw sheared right off.  When it came apart, I found one of the plastic spacers was broken as well.  The parts books don't show any part numbers for these items... does anyone have any info on availability?

I know I can just get different hardware, and I could probably make a new spacer... but just wondering...

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

AshimotoK0:
David Silver sells the plastic part and probably the screws. For 500/750 but should be OK

https://www.davidsilverspares.co.uk/parts/by-part-number/partnumber_61102300000/

Or Yamiya https://www.yamiya750.com/index.php?main_page=product_info&cPath=246_251_144_79&products_id=238

Bl**dy expensive for what they are .. You could probably shape a bit of plastic yourself if postage is expensive to your part of the world.

Just noticed you are in the USA .. DS has a setup over there.

mattsz:

--- Quote from: AshimotoK0 on April 17, 2020, 05:24:27 PM ---David Silver sells the plastic part and probably the screws. For 500/750 but should be OK

https://www.davidsilverspares.co.uk/parts/by-part-number/partnumber_61102300000/

Or Yamiya https://www.yamiya750.com/index.php?main_page=product_info&cPath=246_251_144_79&products_id=238

Bl**dy expensive for what they are .. You could probably shape a bit of plastic yourself if postage is expensive to your part of the world.

Just noticed you are in the USA .. DS has a setup over there.

--- End quote ---

Thanks Ash!  I know so many parts are interchangeable, just a question of what fits and how to find the part numbers.  I have purchased from DS before - they provide a great service, but their prices and shipping are both very expensive.  I might just take care of this particular problem "in house..."  ;)

hondarc166:
d silvers has a site in the usa

RGP750:
I make the plastic parts. you can have some just message me .
I will have to find the stock I made

Navigation

[0] Message Index

[#] Next page