SOHC.co.uk Forums > CB750

Uk spec handle bars

(1/2) > >>

corascate:
Hi all
My us spec 750 k7 has aftermarket handlebars on with no wiring guides (through the handles)
Will the handle bars from an earlier model (k0-k4)fit then I can feed the wires through the bars and tidy it up.
Also anybody know where I can get the front Honda name emblem for between the forks, I have seen the trims but not the name.
 Please be patient as my computer skills are a tiny bit above non existent,,especially the damn spell check/corrector
Cheers
Steve

hairygit:
I seem to recall that the UK version of the K7 had external wiring as well, due to the fact multi plus are used for the connections rather than bullet connectors like the previous models had. It COULD be modified, but it would mean a lot of messing about cutting the multiplugs off the switchgear and wiring loom in the headlight and replacing them with bullet connectors (not cheap).

Sent from my POT-LX1 using Tapatalk

Bryanj:
For the Emblem CMSNL is probably your best bet to find the part number then put number into google

Bryanj:
Emblem is 87126405000 but has been discontinued new. Try ebay usa

Nurse Julie:

--- Quote from: hairygit on April 18, 2020, 12:04:09 PM ---I seem to recall that the UK version of the K7 had external wiring as well, due to the fact multi plus are used for the connections rather than bullet connectors like the previous models had. It COULD be modified, but it would mean a lot of messing about cutting the multiplugs off the switchgear and wiring loom in the headlight and replacing them with bullet connectors (not cheap).

Sent from my POT-LX1 using Tapatalk

--- End quote ---
Correct Mr Hairy, all K's up to and including K6 were all internal wiring with bullets, from K7 onwards, external wiring with plug connectors.

Navigation

[0] Message Index

[#] Next page