SOHC.co.uk Forums > CB500/550

cam cover

<< < (2/2)

MIKE550/4:
that would be good steve

SteveD CB500K0:
I'll try to do it over the weekend and put up on my website for download.

I also have the parts book for the CB550F2

MIKE550/4:
started this today after work got 2 questions

i am certain some of bolts are wrong on this bike and a couple missing

outer bolts ( 4 corners ) can someone confirm what size they are supposed to be,

also the front 2 as you sit on bike in the middle, next to tappet adjustment holes

also the tappet arms, they all move freely up and down apart from 1

as you sit on bike second left at front ( is this normal )

have a pic again

Bryanj:
Outer 4 corners should be 6 x 25 pozi head screws, well not pozi but japanese phillips, DONT put allen screws in as the tappet caps will catch.

Front two that dont go through the breather are 6 x 32 and those that do are 6 x 65 again pozi heads.

There will always be at least one rocker arm that is trying to open a valve even with the screw backed right off.

Navigation

[0] Message Index

[*] Previous page