SOHC.co.uk Forums > CB750

Clutch slip

<< < (5/7) > >>

brodsord:
Thanks,
Gray


Sent from my iPhone using Tapatalk

brodsord:
I’ve taken a few pictures,
The steel plates  that go between the fibre plates, two have small circular almost like punch marks in them, two of them are more flush then there’s a plate that is two plates joined together again this plate is smooth with no punch holes. Are these normal or do they need to be replaced?
Thanks,
Gray




Sent from my iPhone using Tapatalk

Bryanj:
 The worrying one is the one that has some punch marks but some plain on it which means uneven wear like the one fibre.
The double plate was a mod by Honda to try and stop clutch "rattle"
Due to the abnormal wear personaly i would replace all the fibres and plain steel plates plus the springs, the double plate is probably fine to reuse as its thicker and also discontinued.
It was probably all caused by that broken lifter plate putting uneven tension on the clutch.

brodsord:
Thanks Bryan, I get those ordered then


Sent from my iPhone using Tapatalk

Trigger:
Looks like someone has been in there before  ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page