SOHC.co.uk Forums > CB350/400

unknown wires

(1/4) > >>

4wDaz:
Hi I’ve just fitted aftermarket switch gear from silvers and noticed there’s 2 spare wires in the original Honda loom, a orange/white one and a blue/white one, any body know what there for ? The new switchgear wires are all connected so its nothing I’ve missed i dont think
 
 Thanks Daz

Nurse Julie:
Off the top of my head they look like the ones used for the USA spec bikes where headlamp is on all the time and the front indicators double up as running lights. If you're in UK you obviously don't need them.

hairygit:
Julie's spot on, they are for the "clearance lights" in the front indicators of US versions, but all the looms have the cables, but not all are in use

Sent from my POT-LX1 using Tapatalk

4wDaz:
Thanks for the replies, hopefully thats all they are but its a uk bike, unless its had a loom change in its chequered past  ;)

Nurse Julie:

--- Quote from: 4wDaz on April 30, 2020, 07:09:20 PM ---Thanks for the replies, hopefully thats all they are but its a uk bike, unless its had a loom change in its chequered past  ;)

--- End quote ---
All bikes were fitted with the same main loom..Mine is a UK bike and has those wires but obviously never connected from the factory.

Navigation

[0] Message Index

[#] Next page