SOHC.co.uk Forums > CB750

UK Plate Bracket?

<< < (3/4) > >>

AshimotoK0:

--- Quote from: Rookster on May 03, 2020, 08:34:38 PM ---The one I have definitely has a rib on the top.  I didn't pay much for it.  I may still try to use it with some modification.  These pictures show the the rib.  I'm attempting to use the smaller oval taillight.  Any other thoughts on what this bracket is?


Thanks for the help
Scott

--- End quote ---

Not 100% but I think it's 84701-292-600B . Originally fitted to CB450K1  (hence 292 part no. ) then CB250/350K.  The UK versions of the CB450K1 and the CB250K0  and CB250K2 all had the oval tail-lamp.

Bryanj:
Will the oval light fit?  I still think 500 four

Trigger:
The mounting plate is 6 x 6 inch and the tail light mounting holes are 95mm center to center on the CB750K2 and CB500 four




[ Guests cannot view attachments ]


[ Guests cannot view attachments ]


[ Guests cannot view attachments ]

Rookster:
Thanks Trigger.  My bracket has the same measurements as the bracket in Trigger's post.  It looks the same with the square plate mount and the rib.  Is this a CB750 bracket?  I ordered a repro oval taillight but it won't be here for a few weeks. 

Thanks
Scott

AshimotoK0:

--- Quote from: Bryanj on May 03, 2020, 09:22:27 PM ---Will the oval light fit?  I still think 500 four

--- End quote ---

You are correct Bryan but my 750K0 has the rib & oval lamp but is a ---300-- P/N and the 500 also has rib but ---323 part no. ..500 had square lamp though as does Triggers.

I will measure my 750K0 one in the lamp area later ... it has the oval lamp and is original to the bike.

This is the ---323--- 500 part.

UPDATE : Just measured oval lamp between  centres and it is  95mm like Triggers square one ...so you should be OK  :) :).

[ Guests cannot view attachments ] [ Guests cannot view attachments ]

Navigation

[0] Message Index

[#] Next page

[*] Previous page